Phosphate Metal Over the Side Heater
- Always On Time
- Fast, Cheap, and Reliable Shipping
- Quick Response Times (we're talking within minutes)
Standard Lead Times
- 3 Weeks Manufacturing
- 1-3 days shipping
Information
Features
Standard Parts
Thermal Protector / Fuses
Information
- Designed for phosphate coating applications
- Suitable for use in iron, zinc, and manganese phosphate tanks
- Check solution recommendation chart with chemical supplier for proper sheath material selection
- Available in single or three phase
- Power range: 1000-10000 watts
- Operates on 120-480 volts
Features
- Suitable for use in iron, zinc, and manganese phosphate tanks
- Schedule 40, heavy wall, 316 stainless steel sheath resists scaling better than traditional heaters
- Low watt densities up to 23 watts/square inch (3.5 w/cm²) minimize scaling while only using the space required for a full watt density heater
- Rugged cast steel terminal enclosure with 3 ft (.9m) flexible PVC liquid tight conduit
- Grounded construction
- Built-in thermal protector
- Standard replaceable P4 protector for solutions up to 230°F(110°C)
Standard Parts
| MPI P/N | Watts | Volts | Hot Zone | Overall Length |
| IM-DAS1111-P4 | 1000 W | 120 V | 7 “180 mm | 11 “280 mm |
| IM-DAS1211-P4 | 1000 W | 240 V | 7 “180 mm | 11 “280 mm |
| IM-DAS2217-P4 | 2000 W | 240 V | 12 “305 mm | 17 “430 mm |
| IM-DAS2417-P4 | 2000 W | 480 V | 12 “305 mm | 17 “430 mm |
| IM-DAS3223-P4 | 3000 W | 240 V | 18 “460 mm | 23 “585 mm |
| IM-DAS3423-P4 | 3000 W | 480 V | 18 “460 mm | 23 “585 mm |
| IM-DAS3.5229-P4 | 3500 W | 240 V | 21 “535 mm | 29 “735 mm |
| IM-DAS3.5429-P4 | 3500 W | 480 V | 21 “535 mm | 29 “735 mm |
| IM-DAS4235-P4 | 4000 W | 240 V | 28 “710 mm | 35 “890 mm |
| IM-DAS4435-P4 | 4000 W | 480 V | 28 “710 mm | 35 “890 mm |
| IM-DAS5241-P4 | 5000 W | 240 V | 33 “840 mm | 41 “1040 mm |
| IM-DAS5441-P4 | 5000 W | 480 V | 33 “840 mm | 41 “1040 mm |
| IM-DAS6247-P4 | 6000 W | 240 V | 39 “990 mm | 47 “1195 mm |
| IM-DAS6447-P4 | 6000 W | 480 V | 39 “990 mm | 47 “1195 mm |
| IM-DAS8259-P4 | 8000 W | 240 V | 49 “1245 mm | 59 “1500 mm |
| IM-DAS8459-P4 | 8000 W | 480 V | 49 “1245 mm | 59 “1500 mm |
| IM-DAS10271-P4 | 10000 W | 240 V | 62 “1575 mm | 71 “1805 mm |
| IM-DAS10471-P4 | 10000 W | 480 V | 62 “1575 mm | 71 “1805 mm |
Thermal Protector / Fuses
- Replaceable P4: For solutions up to 230°F (82 to 110°C)
- Replaceable P5: For solutions from 230 to 300°F (110 to 150°C)
- Resettable P6: For solutions up to 230°F (82 to 110°C)
- Resettable P7: For solutions from 230 to 300°F (110 to 150°C)
