Mercury Contactor Relays – 35 Amp Series
Mercury Displacement Relays are all designed and built to meet the most exacting demands of industry. They have won their high place in the electrical field by doing the tough and tricky jobs that ordinary equipment could at best do in an uncertain manner. They have proved their ability to stand up under the most adverse conditions of temperature, dust and moisture, in all types of applications.
The 35-AMP normally open contactors are designed and manufactured to high quality specifications and the contactors are commonly used in various heating, lighting, and many other industrial applications including high voltage ultraviolet type loads. The contacts are encased in hermetically sealed stainless steel tubes to provide reliable switching for millions of operations. MDI has manufactured this contactor since 1975. It is available in the single, two, three & four pole models.
- NORMALLY OPEN UNITS:
- `OPERATE TIME: 50 milliseconds
- RELEASE TIME: 80 milliseconds
- NORMALLY CLOSED UNITS:
- OPERATE TIME: 50 milliseconds
- RELEASE TIME: 80 milliseconds
- CONTACT RESISTANCE:
- 35-AMP=.003 ohm*
- 60-AMP=.002 ohm*
- TEMPERATURE RANGE:
- -35°C TO 85°C
- COIL TERMINALS:
- #6 BINDING HEAD SCREWS
- LOAD TERMINALS:
- PRESSURE CONNECTORS FOR
- A.W.G. #4-#14 ON 35-AMP AND
- A.W.G. #2-#8 ON 60-AMP UNITS
- #8 BINDING HEAD SCREWS
- RATINGS:
- SEE PAGE 74 FOR COIL DATA
- SEE PAGE75 FOR RATINGS
- UL LISTING: FILE #E-62767 FOR
- C.S.A.: FILE # LR 41198 FOR
Normally Open Relays:
“L” Version Normally Open Relays:
T-Top Normally Open Relays:
Normally Closed Relays:
