- Manufacturer
- In Stock Ready To Ship
- CSAus Approved Heaters (UL Equivalent)
- Always On Time
- Fast, Cheap, and Reliable Shipping
- Quick Response Times (10 minutes or less)
Shipped From STOCK
We offer one of the most advanced temperature control systems available today. Our modules utilize cutting-edge microprocessor-based technology to perform all necessary PID functions. With built-in diagnostics and full self-tuning capabilities, these units maintain setpoint temperatures without the need for manual adjustments. Simply set your desired temperature, power on the unit, and it will automatically detect the heat-up rate and manage any deviations.
Every feature a molder could desire is integrated into the module. The versatile microprocessor-based programming allows users to adjust 17 parameters directly from the front panel. Once set, these modifications are automatically saved in non-volatile memory.
Features
- Compatible to MCS, Athena, ITC, DME
- Amperage readout
- Anti-Arching feature
- Dual digital displays – Set point and Process Temperature
- Selectable PID or Fuzzy Logic control method
- Selectable Fahrenheit or Celsius operation
- Soft Start cycle is automatically engaged in cold mold start up situations to dry out mold
- Manual override with output power percentage display
- Built in audible alarm
- High and low temperature alarm
- Thermocouple break protection (open) continues to apply learned percentage of power based on conditions prior to thermocouple break
- Thermocouple short alarm to warn against heater runaway
- Shorted Triac / Heater protection
- Open Triac / Heater Protection
- High Amperage indication warns if current exceeds a selected value
- Ground Fault indication with selectable sensitivity
- Standby key lowers setpoint to a safe temperature while machine is idle
- 100% Power Output on demand key
- Compatible with industry standard control modules and main frames
Optional Features:
- Global Standby places all or a group of zones in standby mode (requires main frame modification)
- Global Power Boost raises temperature for all or a selected group of zones for user selected time (requires main frame modification)
Temperature Range: 32 to 842°F (0 to 450°C)
Sensor Input: Type J or K thermocouple, switch selectable
Control Accuracy: ±0.1°F (±0.1°C) dependent on total thermal system
Voltage: 115 to 230 VAC, ±10%
Power Output: 20A @ 240 or 120 VAC 50/60 Hz
Fusing: High speed fuses on both sides of line
Setpoint Control: two buttons—up and down
Manual Power Control: two buttons—up and down
Control Mode: Automatic, Standby, Soft Start, Manual
