Mica Strip Heater Manufacturer
We are a manufacturer who specializes in same-day custom manufacturing
- Manufacturer
- Same Day Manufacturing Available
- CSAus Approved Heaters (UL Equivalent)
- Always On Time
- Fast, Cheap, and Reliable Shipping
- Quick Response Times (10 minutes or less)
Standard Lead Times
- 2 Weeks Manufacturing
- **Same Day Manufacturing Available**
- 1-3 days shipping
INFORMATION
OPTIONS
CONSTRUCTION TYPES
Termination Options
INFORMATION
Length 2.5”-96″
Width Minimum 3/4”
Thickness Standard .156”
Fold over 1/4”
Max Temp 900°F (482°C)
Mounting Slot 9/32” x 3/8”
Terminals 10-32 x 5/8” Post terminals or
10” High temp fiberglass leads
Wattage Recomm. max 35 watts/sq. in.
Voltage 480 VAC Max
OPTIONS
- S/S braided leads for flexibility
- Button terminals
- S/S conduit for maximum lead protection
- Right angle exit available on any construction
- Dual voltage and 3 phase construction
- Spring guard upon request
- Built in thermocouple
- Euro plug
- Terminal box
- Ground wire construction
- Custom mounting holes
- Ceramic terminal covers
CONSTRUCTION TYPES
| Construction Types | ||
| Picture | Type | Notes |
 | CS | Standard mica strip heater construction with no holes or notches |
 | CH | Mica strip heater construction with holes and notches. A drawing is required for this configuration |
 | CB | Mica strip heater with a built-in backplate. Several thicknesses are available. This construction type can be made with or without holes. |
 | CL | Mica strip heater bent into an “L” shape. This heater can be made with or without holes. This heater can be made with or without a built-in backplate |
 | CU | Mica strip heater bent into an “U” shape. This heater can be made with or without holes. This heater can be made with or without a built-in backplate |
Termination Options
| Termination Options | ||
| Picture | Type | Notes |
 | SL1 | Fiberglass leads exiting through the edge on the same side of the strip heater |
 | SB1 | Fiberglass w/ stainless steel braid leads exiting through the edge on the same side of the strip heater |
 | SL4 | Fiberglass leads exiting through the outer surface with a protective spring guard |
 | SB4 | Fiberglass w/ stainless steel braid leads exiting through the outer surface with a protective spring guard |
 | SN1 | Post Terminals at the same end of the heater across the width. The width of the strip heater must be greater than 1-1/2″ |
| SN3 | Post Terminals on opposite ends of the strip heater |
 | SN2 | Post Terminals at the same end of the heater across the length. The width of the strip heater must be greater than 1″ |
| SN4 | Post Terminals at the same end of the heater staggered. The width of the strip heater must be greater than 1-1/2″ |
 | SC4 | Fiberglass w/ stainless steel armor leads exiting through the outer surface |
 | EP | Euro Plug quick disconnect termination. Perfect for applications requiring frequent disconnections. |
