Heaters, Sensors, Controllers, Relays, Linear Displacement, and Leadwire

Home » Heaters » Cartridge Heaters » Underwater Pelletizer Die Cartridge Heaters

Underwater Pelletizer Die Cartridge Heater Manufacturer

Manufacturer
Same Day Manufacturing Available
CSAus Approved Heaters (UL Equivalent)
Always On Time
Fast, Cheap, and Reliable Shipping
Quick Response Times (10 minutes or less)

Standard Lead Times

Information

Styles

Diameters

Construction

LEAD WIRE OPTIONS

END SEAL OPTIONS

Information

These heaters are constructed with the following Design Features:

Hi-Density Swaged Construction with Single-End, Right-Angle Termination Location
44″ MGT 842°F (450°C) Lead Wires (UL / CSA Approved)
1″ Diameter Heater Sheath (Other Diameters available on request)
S/S Sheath Standard, Incoloy Optional
16 Gauge Stainless Steel Mounting Flange
Ground Lead Optional
Other Options Available (wattage, voltage, lead length etc.)

Styles

Style	Picture
High Temperature Leads w/ Cement Potting
High Temperature Leads w/ S/S Braid & Cement Potting
High Temperature Leads w/ S/S Armor & Cement Potting
Welded Lead End Disc w/ S/S Armor & Cement Potting

Diameters

We can also manufacture heaters to exact diameters – ex. 0.496″ Diameter Heaters

Diameter Sizes Available and Tolerances
Sizes – Round					Sizes – Square
Nom Dia	Min Dia	Max Dia	Max Amps	Max Volts	Nom Size	Min Size	Max Size	Max Amps	Max Volts
1/8″	0.119	0.124	3.6	240	3/8″x3/8″	0.369	0.374	9	300
1/4″	0.244	0.249	9	30	1/2″x1/2″	0.494	0.499	9	300
6.5mm	0.25	0.255	9	300	5/8″x5/8″	0.619	0.624	15	300
8mm	0.309	0.314	9	300	Sizes – Rectangle
3/8″	0.369	0.374	9	480	Nom Size	Max Width	Max Depth	Min Watts	Max W/in
10mm	0.388	0.393	15	480	1/8″x1/4″	0.124	0.249	10	30
7/16″	0.432	0.437	15	600	1/8″x3/8″	0.124	0.374	10	50
12mm	0.466	0.471	15	600	1/4″x5/8″	0.249	0.624	10	70
12.5mm	0.486	0.491	15	600	1/4″x1″	0.249	0.999	10	100
1/2″	0.494	0.499	15	600
13mm	0.506	0.511	15	600
17/32″	0.525	0.53	15	600
14mm	0.545	0.55	26	600
5/8″	0.619	0.624	26	600
16mm	0.624	0.629	26	600
17mm	0.663	0.668	26	600
11/16″	0.682	0.687	26	600
19mm	0.742	0.747	26	600
3/4″	0.744	0.749	26	600
20mm	0.782	0.786	26	600
25mm	0.978	0.983	26	600
1″	0.994	0.999	26	600

Length tolerance is +/- 3% or +/- 3/32, whichever is greater.
_{(*excludes disc and lead end varied formation lengths)}
Camber tolerance is .025″ per foot of length. Slight camber is normally not a problem since the heater will flex enough to enter a clean hole.
Wattage tolerance is +5%, -10%

Construction

1. Welded Disc
2. Stainless steel tube in 304/316/321/INCOLOY
3. Ceramic disc insulator
4. Pure magnesium oxide
5. Nickel-chrome 80/20 heater wire
6. Ceramic core
7. Hard ceramic head
8. Lead Wire
9. Optional Potting Compound

LEAD WIRE OPTIONS

Picture	Type	Max Temp	Notes
	MGT 1000°C	1832°F / 1000°C	Flexible, Not Waterproof
	MGT 750°C	1382°F / 750°C	Flexible, Not Waterproof
	Duraflex	1022°F / 550°C	Flexible, Not Waterproof
	MGT	842°F / 450°C	Flexible, Not Waterproof
	TGGT	482°F / 250°C	Durable, Flexible, Not Waterproof
	Teflon	500°F / 260°C	Abrasion Resistant, Small OD, Waterproof
	Silicone Rubber	355°F / 180°C	Very Flexible, Waterproof, Easy to Nick
	SEW2	392°F / 200°C	Very Flexible, Fair Abrasion Resist, Waterproof

END SEAL OPTIONS

End Seal Options
Type	Max Temp	Moisture Protection	Contaminant Protection	Mech. Strength	Vibration Resist.
Ceramic	2500°F 1371°C	Poor	Poor	Excellent	Excellent
Teflon	300°F 149°C	Excellent	Excellent	Very Good	Excellent
Lava	3000°F 1649°C	Poor	Good	Good	Poor
Cement Potting	1800°F 982°C	Poor	Fair	Good	Poor
Epoxylite Potting	650°F 343°C	Fair	Very Good	Very Good	Excellent
Epoxy Potting	265°F 129°C	Good	Good	Excellent	Excellent
Silicone Rubber	500°F 260°C	Excellent	Excellent	Fair	Excellent

Heaters, Sensors, Controllers, Relays, Linear Displacement, and Leadwire

Underwater Pelletizer Die Cartridge Heater Manufacturer

Standard Lead Times

Some of the Products we have Made➟

Toronto, Canada Plant

©2022 MPI Morheat

USA Office